MoveValencia blog

How much does IKEA furniture assembly cost in Valencia, and how long does it take?

Flat-pack furniture boxes being loaded into a white van with an orange stripe outside a furniture store in Alfafar, Valencia

In Valencia, IKEA furniture assembly costs about €20/h per assembler in 2026 as an approximate price, with a 2-hour minimum (around €40) when the visit is assembly only. A MALM chest of drawers takes roughly an hour, a 200 cm PAX wardrobe with sliding doors 2.5–4 hours, and a full bedroom half a day. You pay once it is done; details on our furniture assembly in Valencia page.

Below you will find a table of typical times per item, how the price is worked out, when two assemblers make sense, what to expect with METOD kitchens and what to send to get a price without a site visit.

Key facts

  • Approximate rate: €20/h per assembler; assembly-only visits from 2 hours.
  • With transport from IKEA Alfafar: van with driver €55/h (2-hour minimum, from €110) + €20/h per assembler.
  • Typical time: from 20 minutes (KALLAX shelf) to 1–2 days (full METOD kitchen).
  • Final price: confirmed by the assembler before starting, based on photos and a furniture list.
  • Payment: after the work, in cash or by bank transfer; the VAT invoice is issued by the partner carrier that does the job.
  • Not included: connecting appliances, water, gas or electrics.

How long does each IKEA item take to assemble?

An experienced assembler needs between 20 minutes and 4 hours per item; a full kitchen takes one or two days. These are typical professional times, with the boxes already in the room where the furniture will stay:

IKEA itemApprox. time (assembler)Doing it yourself
KALLAX shelf 2×2 or 2×420–40 min45–90 min
BILLY bookcase20–30 min40–60 min
Bedside table, chair, stool10–20 min each20–40 min
MALM 3-drawer chest40–60 min1.5–2 h
MALM 6-drawer / HEMNES 8-drawer chest1–1.5 h2.5–4 h
MALM bed or similar (no storage)45–75 min1.5–2.5 h
Bed with drawers or ottoman lift-up base1.5–2.5 h3–5 h
PAX 100 cm, hinged doors1–1.5 h2.5–3.5 h
PAX 200 cm, sliding doors and fittings2.5–4 h5–8 h
Dining table + 4 chairs45–75 min1.5–2.5 h
Modular sofa (legs and backs)20–40 min45 min
METOD kitchen, 3–4 m run1–2 daysseveral weekends

These are ranges, not promises. What slows the job down most:

  • Wardrobe interiors. Each KOMPLEMENT drawer, shoe rack or pull-out tray adds 10–20 minutes.
  • Sliding doors. The rails need levelling and the doors adjusting; uneven floors take longer.
  • Difficult walls. Plasterboard or hollow brick needs the right plugs, and sometimes the assembler has to find a solid fixing point.
  • Boxes all over the flat. Searching for box 3 of 4 among thirty cartons is paid time lost.
  • Half-built furniture. Fixing something assembled in the wrong order often takes longer than starting from scratch.

How is the assembly price worked out?

Multiply the hours by €20/h and by the number of assemblers, with the 2-hour minimum for assembly-only visits. It is an approximate calculation: the assembler looks at your list and photos and confirms the price before starting.

JobApprox. hoursApprox. price
Two MALM chests and two bedside tables~2 h~€40 (minimum)
PAX 200 cm with sliding doors2.5–4 h€50–80
Bedroom: bed, PAX 150 cm, chest, 2 bedside tables4–5.5 h€80–110
Living room: 3 KALLAX, table and 4 chairs, TV unit2.5–3.5 h€50–70
METOD kitchen, 3–4 m (no connections)8–16 h€160–320

If the boxes also need collecting from IKEA Alfafar, add the van with driver: €55/h, 2-hour minimum, from €110. On the IKEA delivery and assembly page you will see that the typical job — bring a wardrobe and a chest of drawers, carry them up and assemble them — usually comes to €150–225 (approximate) in a single visit. Car, IKEA delivery or van: the comparison is in our guide on how to get IKEA Alfafar furniture home.

One assembler or two?

One is enough for small items; for tall wardrobes, ottoman beds and kitchens, ask for two. The total cost difference is usually small: two assemblers cost twice as much per hour but finish in a little over half the time.

Ask for two when:

  • a wardrobe over 2 metres tall has to be stood upright once assembled (one person cannot do it safely);
  • the bed has an ottoman lift-up base or a heavy frame;
  • wall cabinets are being hung and a worktop fitted;
  • you want the flat finished in one morning, for example before the main move arrives or on the day you get the keys.

One assembler is fine for shelving, chests of drawers, tables, chairs, bedside tables and low cabinets.

What about METOD kitchens?

A METOD kitchen is the longest assembly job: for a 3–4 metre run, allow 1–2 days of work. Furniture assembly covers carcasses, legs, base and wall cabinets, fronts, hinges, plinths and standard worktops.

It does not cover connecting appliances, water or gas, or any changes to the electrics. For the sink, dishwasher and hob you need a plumber and, depending on the job, an electrician. Plan it like this:

  1. Measure the wall carefully and check the IKEA kitchen planner layout before buying.
  2. The assembler fits the cabinets and the worktop.
  3. Then the plumber and electrician come in for the connections.

If the worktop is made to measure or needs cut-outs for the sink and hob, mention it when asking for a price: that is workshop or specialist-tool work and is quoted separately.

What about IKEA’s own assembly service?

IKEA offers its own assembly when you order; in several countries it is provided through TaskRabbit, the platform of independent professionals owned by the same group. Price and availability depend on the product, postcode and date, and they change over time, so check the current rate on the IKEA website when you buy.

The practical difference is in the organisation:

  • IKEA assembly: a good fit if you order home delivery and are flexible on the date.
  • Assembler by the hour: a good fit if you already have the furniture (from IKEA, second-hand or another shop), if you are mixing assembly with dismantling or putting up shelves, or if you want collection, carrying up and assembly in one visit.

Compare both with the same furniture list in front of you.

What should you build yourself and what should you hand over?

Build small, low items yourself; hand over anything tall, heavy or fixed to the wall. Bedside tables, chairs, KALLAX and BILLY shelving, simple tables and 3-drawer chests are fine with patience and a screwdriver.

Better with an assembler:

  • PAX wardrobes and any tall unit with doors;
  • beds with an ottoman base or drawers;
  • kitchens, high cabinets and wall-hung shelves;
  • several large items at once, when time matters.

On tall furniture, the anti-tip kit in the box is not optional: fix the unit to the wall with plugs that suit your wall type. If you are coming from a move with furniture taken apart in your old flat, our guide on how to dismantle an ottoman bed and a sofa shows what to expect when it is reassembled.

What should you send to get a price?

With a list and a few photos, the assembler can estimate the hours without a site visit. Send on WhatsApp or through the form:

  1. A list of items with names and sizes, or your IKEA order number or article numbers (the 8-digit code on the label). That shows the number of boxes and how complex the job is.
  2. Photos of the boxes, or of the furniture if it is already at home.
  3. Options and interiors: sliding or hinged doors, number of drawers, ottoman base, whether anything needs fixing to the wall.
  4. Wall type for tall units: brick, concrete or plasterboard, if you know.
  5. Address, floor and whether there is a lift, and whether the boxes are already at home or need collecting from IKEA Alfafar.
  6. Date and time slot that suit you.

If you need to move a piece of furniture that is already assembled, see how much it costs to move one piece of furniture; if you just need extra hands to carry boxes up, you can book loaders: movers only, no van, are priced by quote, from photos of what needs moving.

How does it work with MoveValencia?

MoveValencia takes care of the job. You send the list and photos, the assembler confirms the hours and the approximate price, and you only pay once the furniture is assembled.

If you also need a van, the same job can include collection from IKEA Alfafar or another shop, carrying up to your floor, assembly and taking away the cardboard. If you already have someone to assemble and only need the transport, a van with driver is enough.

To get a price, send us the furniture list (or your IKEA order number), a few photos, the address with floor and lift details, and your preferred date.

🎮 1-minute calculator
From45 €/hour+ VATVan with driver

What needs moving? Price in a minute

Pick the service, tap what you’re moving and see an instant estimate.

Start

Minimum 2 hours · estimated price · you pay when the job is done

FAQ

Questions on this topic

As an approximate guide, €20/h per assembler, with a 2-hour minimum when the visit is assembly only (about €40). A PAX wardrobe with sliding doors usually takes 2.5–4 hours, so roughly €50–80. The assembler confirms the price before starting, based on your furniture list and photos, and you pay once the work is done.
An experienced assembler puts together a 100 cm PAX with two hinged doors in 1–1.5 hours, and a 200 cm PAX with sliding doors and interior fittings (drawers, shoe racks, rails) in 2.5–4 hours. If it is your first time, allow about twice as long. Fixing it to the wall is part of the job and should not be skipped.
The total is usually about the same: two assemblers cost twice as much per hour but finish in a little over half the time. Two are worth it for tall wardrobes, ottoman beds and kitchens, where some parts cannot be held safely by one person, and when you want the flat finished in a single morning.
No. Furniture assembly covers cabinets, wall units, fronts, plinths and worktops, but not connecting appliances, water or gas. For that you need a plumber and, if the wiring has to be changed, an electrician. Plan the dates so they come in once the cabinets are in place.
Yes. The team collects your order in Alfafar, takes it up to your flat and the assembler builds it on the same visit. As a guide, the van is €55/h with a 2-hour minimum plus €20/h per assembler: a wardrobe and a chest of drawers delivered and assembled usually come to €150–225, always approximate.

For carriers

Partner sign-in

Your jobs, team and documents in one place.

Forgot password?
Open the sign-in page