How to dismantle an ottoman storage bed and a sofa for moving
To dismantle an ottoman storage bed (a canapé abatible in Spain) for a move, take off the mattress, empty the box, open the lid fully and, with the lid held by a second person or a sturdy prop, unscrew the hinge mechanisms with gas struts from the box. Never unscrew a strut with the lid closed: that is when the gas is most compressed. A sofa comes apart by removing the legs, cushions, back and modules, where the model allows it.
Below are the ottoman bed steps with the gas strut safety rules, how to move one without taking it apart, which sofa parts come off and which do not, and when it makes sense to hand the job to a professional.
Can you take apart an ottoman storage bed?
Yes, almost always in part. An ottoman bed has three blocks: the storage box, the lid (the base that lifts) and the lift mechanisms, which are hinges with a gas strut on each side. What comes apart depends on how the box is built:
| Type of ottoman bed | What comes apart | How it travels |
|---|---|---|
| Flat-pack box (panels with screws or brackets) | Lid, mechanisms, legs and box panels | As flat pieces, wrapped in blankets |
| One-piece box (glued or stapled) | Lid, mechanisms and legs | Box whole, on its side, carried by two |
| Fixed top or drawer base | Legs; drawers out | Whole, with drawers empty and separate |
To tell which one you have, look at the inside corners of the box: screws, metal brackets or cam locks mean flat-pack. If you only see staples and glue, do not try to take it apart — you will break it.
How do you dismantle an ottoman bed step by step?
You need a screwdriver or drill driver, Allen keys, a zip bag for the fixings, masking tape and two people.
- Take off the mattress and empty the box. With no weight inside, it is easier and safer.
- Take photos of the mechanisms and each corner before you loosen anything.
- Open the lid fully. In the open position the struts are extended and under the least tension.
- Hold the lid. A second person keeps it up, or wedge a sturdy wooden batten between the bottom of the box and the lid. From now on the lid must never be left unsupported.
- Release the mechanisms from the box. Unscrew the mechanism plates on the inner face of the box sides, one side and then the other, without taking the strut off the mechanism. The mechanism comes away whole, still fixed to the lid.
- Lift the lid away with two people and stand it against a wall. If you like, unscrew the mechanisms from the lid too and keep them together, marked left and right.
- Remove the legs and the box. Unscrew the legs and, on a flat-pack box, release the brackets and separate the panels and base. All the fixings go in one bag taped to one of the pieces.
Gas strut safety
The struts on an ottoman bed hold pressurised gas. Handled properly they are not dangerous, but a mistake can make the lid drop or a strut spring loose:
- Do not release a strut with the lid closed. Closed, the strut is compressed and holds the most force.
- Do not leave the lid open and unsupported once one side is loose: the other strut cannot hold it alone.
- Never open, cut or heat a gas strut. To get rid of one, take it to a recycling centre (punto limpio).
- Keep hands away from the hinge area while the lid moves; gloves and glasses are a good idea.
- If a strut is jammed or the lid drops on its own, do not force it: get professional help.
The manufacturer’s instructions take priority over this guide: if you still have them, follow their order.
How do you move an ottoman bed without taking it apart?
If the bed fits through the doors and stairwell, carrying it whole can be quicker:
- Remove the mattress and empty the box.
- Close the lid and secure it with two straps or stretch wrap. Without the mattress weight, the struts can lift the lid while you carry it.
- Measure the bed (width, length, height) and the clear width of each door. If the bed’s height is less than the clear width, it goes through on its side.
- Protect the corners with blankets or cardboard and carry it with two people, on its side, hinges up.
An ottoman bed 135 or 150 cm wide and 190 or 200 cm long is a big item for narrow hallways and stair turns. If in doubt, measure first. The full method is in which furniture to dismantle and how to measure doors, stairs and lift.
How do you dismantle a sofa for moving?
Loose parts first, then whatever is screwed or hooked on. Before you start, tilt the sofa carefully and look underneath and at the back: that is where the answers are.
| Part | How it usually comes off | Always possible? |
|---|---|---|
| Seat and back cushions | By hand; into large bags | Yes |
| Legs | Unscrew by hand or with a spanner | Almost always |
| Back | Bracket plates: lift straight up; or screws behind the rear fabric | Depends on the model |
| Arms | Bolts from inside or underneath | On few models |
| Modules and chaise | Unhook the metal connectors under the seat | Yes, on modular sofas |
| Sofa bed mechanism | Does not come apart: close it and strap it | No |
Modular and corner sofas
Modular sofas and corner sofas with a chaise are joined by metal hook connectors under the seat. Lift one module a few centimetres and it comes free. Each module travels separately, which makes stairs much easier.
Back and arms
On many sofas the back hooks on with metal plates: pull it straight up with even force on both sides. On others there are screws behind the rear fabric, which opens with a zip or Velcro. If everything is stapled, the back is part of the frame and does not come off without an upholsterer.
Sofa beds and recliners
A sofa bed mechanism is not dismantled for a move. Close it, strap it so it cannot open when tilted, and carry it with the mattress inside. It is heavy: plan on two or three people. On a power recliner, unplug it and tidy the cables first; on some models the back lifts off after releasing a clip, but check the manual.
What should you do with the screws and parts?
They are what gets lost most in a move, and without one specific screw the furniture does not go back together:
- One zip bag per item, labelled (“bedroom ottoman”, “living room sofa”).
- Tape the bag to a large piece of the same item, not in a separate box.
- Mechanisms and legs wrapped in paper and marked left and right.
- Photos of the assembly on your phone, in an album named after the item.
When should you call a professional?
Dismantling an ottoman bed or sofa is doable if you have tools, time and a second person. It is worth handing it over when:
- the struts are jammed or the lid will not stay in place;
- the back or arms have hidden fittings and you cannot see how they come off;
- it is a heavy sofa bed or recliner;
- the stairs are narrow or there is no lift;
- several pieces need dismantling and reassembling on the same day.
MoveValencia arranges furniture assembly and dismantling and furniture transport in Valencia. As an approximate guide, a van with driver costs 55 €/h with a 2-hour minimum, and each helper 20 €/h. Dismantling and assembly are quoted by us before work starts, depending on the item and the access. You pay once the job is done, in cash or by bank transfer.
If you are also bringing new furniture from IKEA, see how to get furniture home from IKEA Alfafar. For the full cost of the move, read how much a move in Valencia costs.
To get a price, send us photos of the bed and sofa (front and back), their measurements, both addresses, the floor and whether there is a lift.
What needs moving? Price in a minute
Pick the service, tap what you’re moving and see an instant estimate.
StartMinimum 2 hours · estimated price · you pay when the job is done
👇 Pick what you need and we’ll show the price

